HAPIMP PH810W Manual De Instrucciones página 7

1.Insert a Micro SD card and put 4 or 8 AA batteries (Not
included )in.
Please notice the front and back of the Micro SD card when you
insert it in the card slot. If you want to take out the card from
the slot, please lightly press it then pull it out. Please use high
quality alkaline batteries to power the camera.
2.Setup menu in "TEST" mode
Slide the switch to "TEST", press MENU set menu. Set up the
parameters that you desire in the "TEST" mode.
3. Slide the switch to "ON" mode and the camera starts
working
It will start to count down 5 seconds when you switch to "ON",
then the screen will turn off. The camera is in standby mode.
When people or animals trigger the camera to work, it will
automatically take photos or videos. In ON mode, you can set
menu and watch video in APP "Trailcam Link".
4.Play back photos or videos
Slide the switch to "TEST", press REPLAY to watch the photo or
video.
SIMPLE TO USE
SIMPLE TO USE
1
English