• After its use, release the main body from the blade shaft by turning
anticlockwise, and clean it for subsequent use.
How to use the processor:
• Take
the
container and place the
blade shaft in the central
pin on the base, by
pressing down.
• Put
the
food
processed
container, max 150gr, in
small pieces to prevent
the blades from jamming.
• Place the lid on top and
make sure that the blade
shaft is fixed in place by
the lid's inner cap,
• Fit the main body onto
the upper part of the
chopper. Once in place,
turn clockwise until you
hear a click. This means
that it is securely locked
in place.
• Make sure that the arrow is level with the closed padlock icon.
• Plug the device into the mains.
• Turn on by pressing one of the speed switches (I or Turbo).
• When the food is at the required state, unplug the device from the
mains and lift the motor body from the chopper container to access
the food. Take special care with the blades. They are very sharp,
and you could cut yourself.
• Release the motor body from the lid of the chopper by turning
anticlockwise
• The container, blades and lid must be cleaned after use.
processing
to
be
into
the
28