Panasonic SC-HC39 Instrucciones De Funcionamiento página 17

4
Measure and mark the position of both sides of the
wall mount brackets.
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
13 mm
204 mm
Space required
142 mm
75 mm
142 mm
500 mm
100 mm
5
Attach the wall mount bracket to both sides of the
wall with two screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
At least 30 mm
‰7.5 mm to
‰9.4 mm
Wall mount bracket
‰4 mm
300 mm
154 mm
100 mm
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 5)
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall mount
brackets.
Wall
7
Drive the safety holder fixing screw (not supplied)
to secure the safety holder onto the wall.
≥ Refer to step 5 for requirements before screwing.
Fix to the wall
Safety holder
Safety holder fixing screw
(not supplied)
8
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
Wall
Screw eye (not supplied)
Cord (not supplied)
17
RQT9944