INSTALL YOUR FAUCET KIT
12. Connect the flexible water supply hose (W) to the spray hose and middle body.
Carefully bend the hoses to fit available space. Carefully thread the hose couplings to
the spray hose and the side of the middle body.
Note. Be sure to route the hand shower hose on the inside of the frame carrying
bars to avoid getting caught on or rubbing when shower hose is pulled.
13. Connect a 1/2 in. IPS faucet connector to the water supplies underneath the sink using
wrenches.
14. Connect hand held shower into the end of the spray hose by turning metal hose fitting
clockwise. Hand tighten.
10
12
13
14