Publicidad
Idiomas disponibles
Idiomas disponibles
Charging the internal battery
Please charge before initial use. In order to prolong the life of the battery, be sure
to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
1. Connect the USB-C end of the USB cable to the flashlight's input port.
2. Plug the other end of the cable into a USB power port such as a USB wall
charger, USB car charger or power bank.
3. The power charge indicator LED will illuminate red to show that it is
charging. When fully charged, it will turn green.
4. Repeat steps 1 – 3 for the other light head as needed.
5. Charge time for each light head is about 1 hour.
CARE AND MAINTENANCE
•
Do not submerge in water
•
Wipe with a soft clean cloth as needed
•
Recharge after use and every 3-6 months even when not used
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2023 Wagan Corporation. All Rights Reserved.
4
Publicidad
