Descargar Imprimir esta página

Daewoo DAX135-1600 Manual De Uso página 7

Hidrolavadora de alta presión

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
WARNING! The machine is intended to be used at a temperature above o degree. (Only for machine
with power cord of H05VV-F).
WARNING! To ensure the machine safety, please only use original spare parts (including nozzle)
from the manufacturer or approved by the manufacturer. Do not use the machine before you chan-
ged them if they are damaged.
WARNING! Be care of the danger of the kickback force on the spray assembly when opening the
trigger gun and grasp the gun with hands firmly.
WARNING! When the machine is moving and installing, the machine must be in flat. When moving
the machine, pulling the handle to move it.
WARNING! Connect to the water supply.
The machines are not suitable for connection to potable water mains.
Connect the machine to the water supply. (It can be a water container).
Make sure the inlet water pressure keeps between 0.01MPa and 0.4MPa.
The inlet pipe should at least 5 M long. Do not use the pipe if the pipe is damaged.
If you want connect this machine to portable water mains, you must install a backflow preventer in
the water pipe to prevent dirty water flow back to the drinking water system. The backflow preventer
shall comply with EN 60335-2-79 ANNEX AA.
WARNING! Disconnect from the electrical power supply before carrying out user maintenance.
If the mains cable is damaged it must be replaced by the manufacturer, or its service agent or
similarly qualified person to avoid a hazard.
2. CONNECTION
1. Attach the high pressure hose to the pressure water outlet of the machine.
2. Attach the spray handle to the high pressure hose. Prior to operating the machine please ensure
that the high pressure hose has been completely uncoiled. Whilst the machine is in operation the
hose MUST not loop.
3. Mount the nozzle or any other equipment you want to use.
4. Connect the machine to the water and power supplies.
INSTALLATION, ELECTRICAL AND WATER CONNECTIONS
1. pressure cleaner
2. water supply hose
3. water connection
4. water inlet
5. high pressure tube
6. water outlet
7. spray gun
8. power supply
* No. 2, 3, 8 are not included
7

Publicidad

loading