Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
PACKAGE CONTENTS
Description
Quantity
Light Shield Kit
1 Set
NOTE: Keep your receipt and these instructions for proof of purchase. To avoid possibility of electrical shock or fire, the installation personnel must
have professional electric knowledge. Please wear gloves to avoid injury before installation. If any smoke or spark of the wire happened, please turn off
the power immediately and notify relevant personnel. Please use listed water proof strain relief bushing when connecting the supply cord to the outlet
box.
WARNING: Shut off the power at the circuit breaker or fuse panel before removing the old fixture, ballast, or fluorescent tubes. Do not use any electric
generator to test the LED light. Please abide by related country, regional and local law and regulations when install this fixture. Please turn off the power
before installation or maintenance. Proper grounding is required to ensure safety. Please check if there is any damage during shipping. If so, please contact
manufacturer timely. Please read the installation instruction carefully to check whether all the accessories are available. After confirmation, install the led
light according to installation steps.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
LIGHT SHIELD INSTALLATION A
Put the light shield on the fixture.
1
LIGHT SHIELD INSTALLATION B
1
Put the light shield on the fixture.
WARNING: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could
lead to electric shock, fire, or other injuries which could be hazardous or even fatal. • Ensure the electricity to the wires you are working on is shut off.
Either remove the fuse or turn off the circuit breaker.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
See website for Warranty, Troubleshooting or Care and Cleaning details at www.ETiSSL.com.
Questions, problems, missing parts? Call ETiSSL Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday
USE AND CARE GUIDE
LIGHT SHIELD INSTALLATION
Light Shield Kit
1-855-ETI-SSLI (1-855-384-7754) www.ETiSSL.com
Order # 70704101
70705101
Tighten up the screws.
2
2
Tighten up the screws.
Part # VAL-LS-SM
VAL-LS-LG
Publicidad
Manuales relacionados para ETI Solid State Lighting VAL-LS-SM
Resumen de contenidos para ETI Solid State Lighting VAL-LS-SM
- Página 1 Order # 70704101 Part # VAL-LS-SM 70705101 VAL-LS-LG USE AND CARE GUIDE LIGHT SHIELD INSTALLATION PACKAGE CONTENTS Description Quantity Light Shield Kit 1 Set Light Shield Kit NOTE: Keep your receipt and these instructions for proof of purchase. To avoid possibility of electrical shock or fire, the installation personnel must have professional electric knowledge.
- Página 2 N° de command N° de pièce 70704101 VAL-LS-SM 70705101 VAL-LS-LG GUIDE D’UTILISATION ET D’ENTRETIEN POSE DE PARE-LUMIÈRE QUINCAILLERIE INCLUSE Description Quantité Ensemble de pare-lumière Ensemble de pare-lumière REMARQUE: Conservez votre reçu et ces instructions comme preuve d’achat. Pour éviter tout risque de choc électrique ou d’incendie, le personnel d’installation doit avoir des connaissances électriques professionnelles.
- Página 3 Pedido # 70704101 Parte # VAL-LS-SM 70705101 VAL-LS-LG GUÍA DE USO Y CUIDADO INSTALACIÓN DE PANTALLA DE LUZ MATERIALES INCLUIDOS Descripción Cantidad Kit de escudo de luz Kit de escudo de luz NOTA: Guarde su recibo y estas instrucciones como comprobante de compra. Para evitar la posibilidad de descarga eléctrica o incendio, el personal de instalación debe tener conocimientos eléctricos profesionales.