Create Slow Mini Manual De Instrucciones página 11

PROBLEM
Unable to function
normally
Stops midway during use.
Difficulty disassembling
the pressing cup once the
squeezing is finished.
Louder noise during work.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
PROBLEM SOLVING
CAUSE
• The plug does not connect
properly.
• The components of the machine
are not installed in the correct
position.
• The feeding cup is not installed
correctly.
• Inserting too many ingredients
or running continuously for too
long causes the motor to stop
automatically.
• Ingredients were added too
quickly, causing a crash.
• The degree of noise differs
from the type and size of the
ingredients.
SOLUTION
• Reinsert the power
securely.
• Reinstall the components
according to the user manual.
• Make sure the feeding cup is
installed in the correct position.
• Push the switch to the stop
level and remove the power
plug.
• Remove the feed cup and
reduce the ingredients.
• Assemble the feeding cup,
insert the power plug and turn
the switch to "ON" to continue
working.
• If the device stops due to too
long working time, please turn
off the power of the device. Half
an hour later, keep it running.
• Turn the switch to "REV" and
run the device for about 3
seconds.
• Cut the ingredient into smaller
pieces to reduce the noise
properly.
E NGLI SH
plug
11