Publicidad
etc. to clean the casing, as they may, among other things, remove the graphic
information symbols, such as scales, markings, warning signs, etc.
27. Do not use metal scourers for cleaning. Broken pieces of steel wool may
come into contact with electrical parts, creating a risk of electric shock.
28. The equipment is not intended to operate using external timers or a
separate remote control system.
29. Due to the high temperature, be especially careful when removing cooked
food, removing hot fat or other hot liquids.
30. Do not place the device under kitchen cabinets due to rising heat and
steam.
31. Do not wash metal parts in dishwashers, because the aggressive agents
used in these devices darken the above-mentioned surfaces. parts. It is
recommended to wash them by hand, using traditional dishwashing liquids.
32. To avoid overheating the oven, do not cover the device.
33. Do not store anything in the oven other than the accessories that belong to
this device.
34. Do not use the oven with the door open.
ATTENTION: Odor and smoke forms in the first use are normal. This is not a
failure.
ATTENTION: The device will not operate without turning the timer knob (11)
from the zero position to the required cooking period.
Product description: Electric Oven CR 6023
1. Housing
2. Inside lamp
3. Trail for inserting a tray or rack
4. Control panel
5. Oven glass door
6. Handle
7. Feet
Assembling
Feet assembly
1.Turn the device sideways and place it on a flat surface to see the bottom part.
2. Align the 4 plastic legs (7) delivered with the device to correspond to the holes on the corners of the bottom part.
3. Insert the tabs by pushing the plastic legs (7) to their housing.
4. Place the device on a flat, dry and heat-resistant surface in accordance with safety rules.
5. Wipe and dry the device with a wet cloth or sponge in accordance with cleaning instructions.
Before first use
1. Place the device keeping the free spaces described in point 20.
1. Wash and dry the tray (8) and rack (9). Plug in the device.
2. During first use, operate your device for 30 minutes at the highest temperature, empty with the door (5) closed. It is reccomend to let the
device get rid of all residues of oil from production process. Odor and smoke forms in the first use are normal. This is not a failure.
3. Properly ventilate the area.
4. During operation, except for the first use described above: Do not operate the device when it is empty for longer than is necessary to
8. Square enamel tray
9. Grid / Rack made of stainless steel
10. Temperature setting knob 0-245 degree of Celsius
11. Timer knob 0-90 minutes
12. Temperature lamp
13. 6 programs setting knob
6
Publicidad
