Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
plug wire from the spark plug. Refer to the mower's Operator's Manual for complete safety instructions. Do
not operate the mower without the entire mulch kit in place.
CARTON CONTENTS
Before installing this accessory, remove all parts from the carton. Use caution when handling parts, some metal parts
may have sharp edges. Carton contents are shown in Figure 1 below. Part numbers are shown in parentheses and each
item has been identified with a letter code, [X], for use when following the assembly instructions. Reference to right or left
side of the mower is observed from the operating position.
TOOLS REQUIRED
One 9/16" open end or box wrench. Two 1/2" wrenches.
[A] Hex Flange
Lock Nut 5/16-18
(01000635)
[C] Hex Head
CapScrew 5/16-18
(00013406)
Figure 1
TABLE OF CONTENTS
Assembly
Español
Service Numbers
ASSEMBLY
Before installing this accessory, shut the engine off and allow it to cool. Disconnect the spark
[B] Mulch Baffle
(02005517)
[E] Hex Flange
Locknut 3/8-16
(00022560)
Back Cover
[D] Carriage Bolt
3/8-16 x 1 1/4
(01002010)
2
2
5
Cutter Deck
Publicidad
