Descargar Imprimir esta página

Shark STRATOS AZ3000 Serie Guia Del Usuario página 6

Aspiradora vertical con cepillo giratorio de autolimpieza y tecnología neutralizadora de olores duoclean powerfins hairpro powered lift-away

Publicidad

Idiomas disponibles

Idiomas disponibles

EMPTYING THE DUST CUP
IMPORTANT: Unplug the power cord before performing any maintenance.
To remove Dust Cup, press release button on
top of the pod. Tilt dust cup away from wand,
then lift to remove.
To remove collected debris from Lint Screen,
press Handle Release button and lift handle
to access screen.
s h a r kc l e a n . c o m
q u a n t i t i e s p l e a s e r e f e r t o P r o d u c t I n f o r m a t i o n S h e e t . I m a g e s s h o w n i n t h i s d o c u m e n t s h o u l d n o t b e u s e d f o r c o l o r , r e f e r o n l y t o c a l l o u t s f o r c o l o r . N o t h i n g i s t o b e c o n s i d e r e d f u l l s c a l e u n l e s s e x p l i c i t l y s t a t e d . F o r
To empty debris into the trash, push the lever
on the back of the dust cup and the lid will
drop open. To close the lid, pull the lever
back until it clicks into place.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
Regularly rinse and replace the filters to
maintain your vacuum's suction power and
to maximize the effectiveness of the odor
neutralizer technology.
To prevent damage from cleaning chemicals,
rinse filters with cold water only. Allow all
filters to air-dry for at least 24 hours before
reinstalling them to prevent liquid from being
drawn into electric parts.
IMPORTANT: DO NOT use soap when
cleaning the filters.
Filter
Door
Release
Filter Door
CLEAN HEPA FILTER EVERY YEAR
With the dust cup removed, pull the tab on the bottom of the pod to release the Filter Door.
Lift off the door, then remove the HEPA Filter.
To reinstall, insert HEPA Filter into unit and replace filter door.
NOTES: • The pre-motor filters should be replaced every 2.5 years. The HEPA filter should be replaced every 3 years.
• Vacuum seal is effective against inanimate allergens such as dust and dirt particles.
CLEAN PRE-MOTOR FILTERS
EVERY MONTH
Remove Dust Cup, then lift out the Foam and
Felt Filters.
HEPA
Filter
s h a r kc l e a n . c o m

Publicidad

loading