Control Panel; Ice Size Adjustment Guide - Maxx Ice MIM50 Manual De Instrucciones

5.Repeat step 5 to rinse the ice making system one more time.
6.Press the ON/OFF button again. The machine will return to the regular ice making mode. Discard
the first batch of ice.

Control panel:

Description of LEDs and buttons:
1. Bin Full (Red) LED
When this is lit, the ice storage bin is full of ice or there is something blocking the bin-full probe.
The unit will stop working. When ice cubes are removed from the ice storage bin, freeing the bin-full
probe, the red LED will remain flashing for 3 minutes, then the unit will restart and return to the ice
making mode.
2. Ice Making(Green) LED
When this is lit, the unit is working in the ice making mode controlled by a temperature probe on the
evaporator. When the green LED flashes, the unit is working in the ice making mode controlled by a
fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light
When this is lit, the unit is working in the ice harvest mode controlled by the ice-full probe.
4. Mode button: Mainly for service. When this is pressed, the ice making mode changes to the ice
harvest mode or vice versa. The mode can be judged from the status of the green and yellow LEDs.
5. Adjust button: Mainly for service. When this is pressed over 3 seconds, the unit will enter the
Ice Size Adjustment mode. The mode can be judged from the status of the yellow LEDs.

Ice Size Adjustment Guide:

1. Press and hold the "Adjust" button for at least 3 seconds.
Adjustment mode. The "HARVEST" LED (yellow) will be blinking continuously during the ice
size adjustment.
2. While in the Ice Size Adjustment mode, press the "Clean"
the desired ice size.
Smaller ice setting:
Bin full indicator light
:
Ice making indicator light
:
Release the button when the LED blinks continuously to adjust the ice size.
_
+
The unit will enter the Ice Size
(-)
button or the "Mode"
21
(+)
button for