Xiaomi Smart Cooking Robot Manual De Usuario página 12

Whisk
In addition to whipping cream or egg whites, the whisk can also be used at low speed to ensure even mixing of the food, so as to
prevent food from sticking or burning onto the pot boom. Follow the steps below for installation and removal:
1. Place the whisk onto the blender blade by inserting
it into the gap of the cross-blade, and turn it slightly
to x it in place. Make sure that it cannot be easily
removed.
2. Hold the handle of the whisk and shake upwards to
remove.
CAUTIONS
· Do not use a speed over Level 5.
· Do not use the scraper while using the whisk.
· It is forbidden to install or remove the whisk while
the cooking robot is in use.
Blade Cover
The blade cover is used to enhance the convection of liquid in the pot and protect soer ingredients from being cut up by the
blade. It is suitable for simmering and sous-vide cooking, and can also be used with the steam/boil mode and the stew mode.
When removing and installing the blender blade, the blade cover will also protect your hand from being cut. Take the following
steps to install and remove the blade cover:
Installing: Align the center of the blade cover with
the blade handle, and press down the blade cover to
make sure it is secured in place.
Removing: Hold the handle of the blade cover to
remove it upward.
CAUTIONS
· Do not use at a speed over Level 1.
· Make sure the temperature does not exceed 100°C.
· Only use the blade cover when stewing or boiling with
an adequate amount of liquid. Do not boil-dry the blade
cover at high temperatures.
How to Use
Plug the power cord into a 220-240 V AC socket, connect the power, and turn on the cooking robot, and then the boot animation
will show on the screen.
The cooking robot's screen will automatically go out by default if no operation is performed in 10 minutes, and its auto-o time
can be adjusted in the seings. Aer the screen is o for 10 minutes, the cooking robot will enter the energy-saving mode. Press
and hold the control knob for 3 seconds or go to the drop-down menu to turn o the cooking robot. To start the cooking robot,
press the control knob. If the cooking robot will not be used for an extended period, press the power buon to turn the cooking
robot o.
Note: You can wake up the screen by tapping the screen or pressing the control knob.
Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other
smart home devices.
Scan the QR code to download and install the app. You will be directed to
the connection setup page if the app is installed already. Or search "Mi
Home/Xiaomi Home" in the app store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow
prompts to add your device.
Handle
Whisk
10
Blade Cover
9DD2934D