Storing and transporting the device
Store the device and its components in a dry, dust-free place.
Transport the device upright in its original packaging.
Setting up the device
Electric shock may occur due to a humid environment.
Do not set up the device outdoors or in humid
Fire may occur due to overheated components.
When setting up the device, observe the minimum
Protect the device from naked flames or hot
Protect the device from direct sunlight.
Set up the device ensuring that the mains plug is
Place the device on a sufficiently stable surface. Make sure that there
is a gap of at least 20 cm from the back wall and at least 10 cm to the
nearest wall at the sides.
Adjust the feet so that the device is exactly level.
Leave a space for an opening angle of 160° for the door of the device.
Device start-up
Clean the device thoroughly before using for the first time (see p. 98).
Connect the device to the power supply (see p. 96).
WARNING
rooms.
WARNING
distances specified in this manual.
surfaces.
accessible.
English instructions for use
95