Device maintenance
Device maintenance
Electric shock may occur when working on the device.
Before working on the device, remove the mains
Short circuiting may occur due to ingress of water or
other liquids.
Do not use a steam cleaner.
Make sure that no water or other liquids get into the
Damage to the device may occur due to incorrect
cleaning.
Use only warm water and detergent, if necessary,
Cleaning the device when necessary
If necessary, remove the bottles.
Wipe the device with a damp cloth and a little detergent if necessary.
Dry the device and all parts with a soft cloth.
Clean the glass door with a standard glass cleaner.
Dry the device and all parts with a soft cloth.
Remove the dust from the ventilation opening at the back with a
vacuum cleaner or a soft brush.
98
WARNING
plug from the socket. To do this, pull out by the
mains plug.
WARNING
housing of the device.
CAUTION!
and soft cloths.