Beamz LED PAR36 DMX SPOT Manual De Instrucciones página 6

DIP switch settings
Notes:
① √ means on, X means off, O means on and off is selectable
② When in DMX control, the address can be set by dipswitches 1 – 9.
③ 0x - 16x means 1 time - 32 times of speed. Speed switches can be any combination, adjustment range is
(0x~31x).
DMX Settings
DMX Channel
1. Total function control
Speed control
2.
3. Red
(151.148 / 151.151 only)
4. Green
(151.148 / 151.151 only)
5. Blue
(151.148 / 151.151 only)
A DMX signal terminator is recommended to avoid a bad signal caused by other electrical devices. A DMX terminator is a
XLR connector with a 120Ω resistor between pin 2 and pin 3 of the XLR connector. Connect it to the last OUTPUT socket
of the final light.
See picture:
IN OUT
DMX Value Display
0~49
50~99
100~149
150~199
200~249
250~255
0~255
0~255
0~255
0~255
IN
www.tronios.com
Copyright © 2011 by TRONIOS the Netherlands
OFF
Dimming
Flash
Shade
Sound control
All bright
Speed adjust from slow to fast
Dimming from darkness to brightness
Dimming from darkness to brightness
Dimming from darkness to brightness
OUT
Specifications
IN OUT
120Ω