Pur Line DRYOS 10 Manual De Instrucciones página 10

PARTS
OPERATION
CONTROL PANEL
USE
Connect the power cord to the wall socket
All LED indicators on the panel will be on for 1s and then off, at the same time the buzzer will ring for three
times. When the unit connects with power, the power indicator turns red.
Press the power button to turn on the unit, the unit will start dehumidifying and the wind deflector will go up.
Press the power button again to turn off the unit, the power indicator turns red, and other indicators will be
off. The unit will keep working for 4 minutes then turn off, and the wind deflector rotates down to its original
position.
Notice: The device can record the dehumidify mode and humidity mode of last time.
1. Mode
Press the mode button to adjust the wind speed among Low, Mid and High mode,the corresponding indicator
turns on. Press the button again, it will start from beginning.
Notice: When the unit dehumidifies in any humidity mode, user could set wind speed and timer at will.
5
1. Handle
6
2. Control Panel
3. Air Outlet
4. Continuous Drainage Hole
7
5. Water Tank Cover
8
6. Float
EN
1
2
3
10
4
12
7. Water Tank
8.Water Level Window
9.Air Inlet
10. Filter
11. Humidity Sensor
12. Power Cord
Cloth Dr y
8
9
11