VBM REPLICA 2B ELETTRONICA Manual De Instrucciones página 82

2
3
7
7
24
Each unit has a pushbutton panel for coffee dispensing.
4
1 Continuous dispensing/programming button "
• Press the button (1) to start continuous coffee dispensing; to stop dispensing,
• Pressing and holding this button for 10 seconds, you access dose programming
5 6 1
2 "One short coffee" dispensing button "
• Press the button (2) to start coffee dispensing; when the programmed
3 "One long coffee" dispensing button "
• Press the button (3) to start coffee dispensing; when the programmed
4 "Two short coffees" dispensing button "
• Press the button (4) to start coffee dispensing; when the programmed
5 "Two long coffees" dispensing button "
• Press the button (5) to start coffee dispensing; when the programmed
6 Hot water dispensing button "
• Press the button (6) to start hot water dispensing; when the desired amount
7 Manual coffee dispensing switch.
• In the event of an electronic card fault, coffee can manually be dispensed;
9,
DESCRIPTION OF THE UNIT CONTROLS.
press the button again.
(see the paragraph "PROGRAMMING THE DOSES").
amount has been reached, dispensing will automatically stop.
amount has been reached, dispensing will automatically stop.
amount has been reached, dispensing will automatically stop.
amount has been reached, dispensing will automatically stop.
has been reached, press the button (6) again to stop dispensing.
press the switch (7) to start dispensing and when the desired amount has
been reached, press the switch (7) again to stop dispensing.
".
".
".
".
".
".