Roadstar TTR-9645EBT Manual De Instrucciones página 8

3 English
RADIO OPERATION
1. Select "TUNER" mode by pressing the [MODE] button (2) repeatedly;
2. Adjust the frequency to your desired station by using the [TUNING KNOB] (5).
Note: For a better reception, reorient the antenna (16).
AUX IN OPERATION
1. Select "AUX" mode by pressing the [MODE] button (2) repeatedly;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
Note: Music control (play, pause, etc) must be done from your external device.
USB OPERATION
1. Select "USB" mode by pressing the [MODE] button (2) repeatedly;
2. Plug an USB stick into the
3. Playback will start automatically from the first track.
Note: Some mp3 player may not be able to play via the usb socket. this is not a mal-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is OFF.
REPEAT
Press [REPEAT] button (13) to repeat the current track (the USB LED will blink),
press again to repeat all the track (the USB LED will blink faster).
BLUETOOTH OPERATION
1. Select "BT" mode by pressing the [MODE] button (2) repeatedly;
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "TTR-
9645EBT";
3. You can now transfer the music to the
Note: Music control (play, pause, etc) must be done from your external device.
DIRECT USB ENCODING
The unit can encode from Turntable or AUX-In.
1. Plug the USB stick into the [USB PORT] (7);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (13) to start encoding (the source's LED will blink);
4. Once the record is finished, press the
[AUX-IN SOCKET]
[USB PORT]
(6).
(7);
TTR-9645EBT.
[RECORD] button (13) to stop recording.