Descargar Imprimir esta página

Panasonic CT-32SL13 Instrucciones De Operación página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Optional Equipment Connections
Note:
The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection
VCRs, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note:
VIDEO 1 input is a dual-purpose input. It is primarily
intended for connection with 480i devices such as a DVD
player using the Y P
Audio L & R jacks. However, it can also be connected to
conventional composite video sources such as a VCR,
using only the Y/Video jack and Audio L & R jacks. The
on-screen label will display Component or Video 1
depending on which source is connected.
Procedure
Connect equipment as shown to front or rear Audio/
Video input jacks.
Select the Video mode by pressing TV/VIDEO button.
Operate optional equipment as instructed in equipment
manual.
Front Control Panel
The front control panel can be used to acces menus and
switch video mode when the remote control is not
available..
Note:
The ON/OFF indicator LED (red) will lit when the set is on.
Procedure
Connect equipment to front Audio/Video input jacks.
Press TV/VIDEO button to select VIDEO 3 input mode.
Operate optional equipment as instructed in equipment
manual.
P
component video jacks and
B
R
O
PTIONAL
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
Procedure
Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
Using the cable box, tune to the premium cable channel
you want to view.
Digital TV - Set-Top Box (DTV-STB) or DVD
Player Connection
Use this diagram to connect the Panasonic DTV-STB
(Digital TV-Set-Top Box) to the back of your TV.
TERMINALS ON BACK OF
DTV-STB OR DVD PLAYER
CABLES NOT SUPPLIED
Notes:
There are three video jacks, Y, P
Separate
component
luminance and color separation. Use the L (left)
and R (right) audio inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
E
C
QUIPMENT
ONNECTIONS
TERMINALS ON BACK OF TV
, and P
B
color
inputs
provide
5 l
.
R

Publicidad

loading

Este manual también es adecuado para:

Ct-32sc13Ct-36sl13Ct-36sc13Ct-3653