UTC Fire & Security interlogix SB Serie Manual De Instalación página 22

"Master" module channel selection
Select the channel of the barrier on "Master" module (see also "Channel
selection" on page 13).
Figure 18: Master module channel selection
Channel 1
(OFF OFF)
Detection mode selection
Select the detection mode: simple detection or interdetection (not available in
modules SB4200-N).
The detection mode is set on the "Master" module:
• Switch 5 of the "Master" module ON to select dual-detection.
• Switch 5 of the "Master" module OFF to select simple detection.
22
Channel 2 Channel 3
(ON OFF) (OFF ON)
SB Series AIR Beam Detectors Installation Manual
Channel 4
(ON ON)