Publicidad
Idiomas disponibles
Idiomas disponibles
"+" / "-" buttons to set the start time between 0-23 o'clock. Confirm your selection with the Timer button. Press
the "+" button to set the end time (at least 1 hour higher than the start time) and confirm your selection with
the Timer button.
The Display
will show the number 2 (for the second hour of operation). Now you can set one more time
range as described above.
Once the settings for the first day have been completed, the icon 2 will flash on the display. Now you can make
the time settings for the other days of the week as described above.
• Example 2: Please press the Timer button (instead of "+" / "-" buttons) to set the anti-freeze mode for the
selected day.
Note: Each step must be taken within two minutes, otherwise the setting will be cleared.
• Anti-frost mode: the room temperature is maintained at 5°C to prevent frost formation.
• Comfort mode: comfortable room temperature, which is achieved with temperature and heating level
settings as required.
BODY DETECTOR (MOTION SENSOR):
• Once PI-P2-P3-P4-UP mode is set, body detector will be activated at the same time. The symbol
appears on the display.
• When the pre-set timing of week timer comes, appliance will start heating.
• If no movements are detected, heating will stop after 15 minutes. and will resume as soon as someone moves
within the radius.
Note: The motion sensor is only activated automatically in comfort mode, in anti-freeze mode this function is
not supported.
24 H TIMER:
• In P1 mode, touchtimer button twice quickly to activate 24 hour timer setting. The icons
flash on the display. Please set the desired off time between 0 and 24 hours with the "+" / "-" buttons. After
five seconds the settings will be saved (symbols will stop flashing) and the display will show the ambient
temperature and the timer countdown.
• Touch timer button again to cancel the setting. Screen
CHILD LOCK FUNCTION:
• In standby mode, touch "+" and "-" at the same time for 3 seconds to activate child lock function, the display
[ ]
will show
after setting and will recover to initial display in 5 seconds. Other function is invalid once child
lock function works. Once a button is touched, screen will flash
and recover to initial display in 5 seconds.
• Touch and at the same time for 3 seconds again cancels child lock function.
INTELLIGENT OPEN WINDOW DETECTION:
Long press
for 3 seconds to switch on open window detection mode. The symbol
display. To cancel open window mode, press button
• When room temperature drops 5°C within 10 minutes, while the heating function is activated, the unit will
consider this as an effect of an open window. After 30 minutes, the room temperature is measured again. If the
room temperature is the same or lower than before, the heating function is deactivated. The symbol
shown permanently on the display.
• Once you have closed the window, please press the button
will flash again on the display.
EN
will turn to show room temperature.
[ ]
to remind you child lock function is working
again.
again to reactivate the function. The symbol
15
and
will
flashes on the
is
Publicidad
