Descargar Imprimir esta página

Pioneer DEH-P7600MP Manual De Instrucciones página 20

Reproductor de cd/mp3/wma de alta potencia con sintonizador rds y control de cd múltiple/dab

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
06
Built-in CD Player
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1
Press OPEN to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
2
Insert a CD into the CD loading slot.
Playback will automatically start.
# You can eject a CD by pressing EJECT.
# To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
20
En
All manuals and user guides at all-guides.com
1
2
CD loading slot
EJECT button
3
Close the front panel.
4
Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5
To perform fast forward or reverse,
press and hold c or d.
# If you select the search method to
ROUGH SEARCH, pressing and holding c or d
enables you to search every ten track in the cur-
rent disc. (Refer to Selecting the search method
on page 22.)
6
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 56.
! When a CD TEXT disc is inserted, the disc and
track titles automatically begin to scroll in the
display. When Ever Scroll is set to ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 49.

Publicidad

loading