Publicidad
Idiomas disponibles
Idiomas disponibles
Triple joint
Water pool
1. First, open any of the outlet valves at the outlet of the water heater, then,
open the inlet valve. The electric water heater begins to be filled with
water. When there is water coming out of the outlet valve normally, it
implies that the heater has been fully filled with water, and the outlet valve
can be closed.
Note: During normal operation, the inlet valve shall be set in the status
of "open".
2.
Insert the supply plug into the socket, the two indicator lights will be on at
the same time..
3.
This machine can automatically control the temperature. When the water
temperature inside the machine has reached the set temperature (It is set
to 75℃), it will be turned off automatically, and step into the status of
thermal insulation; when the water temperature is decreased to a certain
point, it will be turned on automatically to restore the heating, and the use
of hot water will not be interrupted. When the heater is switched off auto-
matically, the heating indicator will turn off.
Hot
Cold
water
water
outlet
inlet
Mixing valve
Power cord
Pressure relief valve
Water inlet valve
5
Shower nozzle
Water inlet valve
Running water pipe
Publicidad
