4. Operation Of The Unit
Basic Functions Of Electric Water Heaters
Key Name
"ON/OFF" Key
" - " Key
" + " Key
"ECO" Key
"ON/OFF" key:
①
Press the key; the indicator light shall be on for 2 seconds after power-on.
In case of power down, the user settings will be saved by the memory func-
tion and restored once the power is on again.
To switch off the system press" ON/OFF".
●
By pressing the "ON/OFF" key under any working state, the system
will switch off (except in case of fault state; the indicator lights will flash
and show the corresponding fault phenomenon). When the system is
switched off all lights will be off.
●
First time the appliance is turned on the mode ECO is activated auto-
matically. To change the temperature, press the eco bottom to discon-
nect the function and then, regulate the temperature desired with "+"
and "-" bottoms.
Function Name
ECO/SMART CONTROL
function
Heating/heat
preservation function
Power off memory
Factory default
Automatic sleep
function
Anti-freeze protection
Control panel(as shown)
1
2
3
NOTE
6
Temperature
information area
Selected temperature
Actual temperature
4
5