Specific Safety Rules; Functional Description - Milwaukee 1854-1 Manual Del Operador

1. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
2. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
3. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
4 Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free re-
placement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specifi cally designed to fi lter out microscopic particles.
Symbology
Underwriters Laboratories Inc.
Canadian Standards Association
Mexican Approvals Marking
Volts Direct Current or
Alternating Current
No Load Revolutions Per Minute
Amperes
10
10
9
8
7
10
6

SPECIFIC SAFETY RULES

FUNCTIONAL DESCRIPTION

10
1
2
10
8
7
5
10
4
6
Tool
No
Volts
Load Boring
Cat. No.
AC/DC
RPM
1854-1
120
1-1/2"
350
2404-1*
120
250 1-1/2"
* To adapt a 3/4" capacity chuck to Cat. No. 2404-1 drill with No. 3 Internal Morse Taper
Socket specify Chuck Kit No. 49-22-1550. Kit consists of Chuck No.
48-66-2000 and Arbor No. 48-07-0100.
1
9
3
4
5
Specifi cations
Wood
Flat Ship
Hole Auger
Auger Selfeed
Saws Bits
Bits Bits Bits
6"
1-1/2" 1-1/2" 4-5/8"
6" 1-1/2"
1-1/2" 4-5/8"
1. Pipe handle
2. Chuck
(Cat. No. 1854-1)
3. Morse Taper Socket
(Cat. No. 2404-1)
4. Reversing switch
5. Trigger switch
6. Switch handle
7. Motor housing
8. Nameplate
9. Spade handle
10. Insulated gripping surfaces
Steel Masonry
Steel Carbide
Bit Tip Bit
3/4" 1-1/2"
1-1/4" 1-1/2"
page 3