EN
Outdoor Fast Charge Powerbank
FR
Batterie externe à charge rapide pour extérieur
2.3 Operating Elements
See Fig. 1.
1 Protective cover
2 LED status indicator
3 Solar panel
4 Torch
5 Function button
3 Intended use
We do not permit using the device in other ways like
described in chapter "Description or Function" and „Sa-
fety Instructions". Not attending to these regulations
and safety instructions might cause fatal accidents, in-
juries, and damages to persons and property.
IP44: This product is protected against splash and con-
tact with foreign objects ≥ Ø1 mm.
4 Preparation
1. Check the scope of delivery for completeness and
integrity.
2. Compare the specifications of all used devices and
ensure compatibility.
5 Connection and operation
5.1 Switching the power bank on and off
• Press the function button 1x to switch on the pow-
er bank.
• Press the function button 2x to switch off the pow-
er bank.
The power bank turns on automatically when you con-
nect a mobile device. The power bank switches off au-
tomatically after 30 seconds if no mobile device is con-
nected.
5.2 Charging the power bank
The power bank is supplied partially charged.
Fully charge the power bank before using it for the first
time!
1. Open the protective cover.
2. Connect the USB-C™ or Micro-USB socket of the
power bank to a USB power source via a char-
ging cable.
This can either be a 230 V USB charging adapter, a
12/24 V car USB charger or the USB socket of a PC.
3. Disconnect all cable connections after charging.
4. Close the protective cover.
When LED 6 lights up red, the power bank is charging
via the solar panel.
5.3 Charging a mobile device
1. Open the protective cover.
2. Connect your mobile device to the USB-C™ socket
or one of the USB-A sockets.
Your mobile device will start charging.
It is not recommended to charge multiple mobile de-
vices at the same time via the power bank. If several
devices are being charged at the same time, the Quick
Charge function cannot be used.
3. Disconnect all cable connections after charging.
4. Close the protective cover.
5.4 Switching the torch on and off
• Press the function button for 3 seconds to switch the
torch on or off.
REV2023-05-24
Subject to change without notice. |
V1.1aw
Sous réserve de modifications.
6 USB-A QC 3.0 socket
7 USB-C™ socket
8 Micro USB socket
9 USB-A plug
10 USB-C™ plug
5.5 Checking the charging status
See Fig. 2.
Briefly press the function button to display the battery
status. If no LED lights up despite pressing the function
button, the power bank is completely empty.
During the charging process, LED 1-4 flash blue.
LED 5 lights up green when Quick Charge is active.
LED 6 lights up red when the power bank is being char-
ged via the solar panel.
6 Maintenance, Care, Storage and
Transportation
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Charge the batteries every three months to ensure
they maintain capacity when not in use for an exten-
ded period of time.
• Store the product out the reach of children and in a
dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
7.1 Product
According to the European WEEE directive,
electrical and electronic equipment must not be
disposed with consumers waste. Its compo-
nents must be recycled or disposed apart from
each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the en-
vironment.
As a consumer, you are committed by law to dispose
electrical and electronic devices to the producer, the
dealer, or public collecting points at the end of the devi-
ces lifetime for free. Particulars are regulated in natio-
nal right. The symbol on the product, in the user manu-
al, or at the packaging alludes to these terms. With this
kind of waste separation, application, and waste dispo-
sal of used devices you achieve an important share to
environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at
the suitable collection points – paper belongs in
paper bins, plastics belong in yellow sacks and
glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered
trademark of the Wentronic GmbH ensures,
that the product is conformed to the basic
European standards and directives.
- 5 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
53934
Material damage
Goobay® by Wentronic GmbH