Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Display & Buttons
Pairing the T-MT with the Heater
1. Double press the Pairing button on the SMART-R box of the heater. The green
pairing status LED will start to flash and the heater is ready for pairing.
2. Ensure power is available to the T-MT, but that the power button on the unit is
switched off. "OF" is shown on the display.
3. Long-press the SET button on the T-MT and the word "PAIR" will flash on the
display.
4. When pairing has completed successfully, the green pairing status LED on the
SMART-R box will become a steady green and the word "PAIR" on the T-MT will
disappear.
5. You should not experience any difficulty in pairing, but in case you do, please
ensure the T-MT and Heater are within range of each other and try the above
process again.
6. Press the Power button on the T-MT to start using it to control the heater.
T-MT Mains powered
wifi thermostat
1. Day of week
2. Time
3. Temperature
4. Heating on symbol, Holiday
Mode Symbol, Window Open
Enabled Symbol, Windown
Open Alert Symbol
5. Operating Modes
6. Holiday (Away) Days remaining
7. Program number being run
8. Power On / Off
9. SET button
10. PRG Program button
11. Minus '-' button
12. Plus '+' button
13. Holiday Mode
Publicidad
