BH FITNESS G860i Manual Del Usuario página 11

You can vary the exertion level during
the exercise
UP▲/DOWN▼ keys.
FITNESS TEST
Use the UP▲/DOWN▼ keys to select
the FITNESS
ENTER. Press START/STOP to start
the exercise.
The user has to travel the greatest
distance possible in 8 minutes.
When the time is up, the electronic
device will work out the difference and
your fitness rating will be displayed up
on the screen: «F1, F2,..., F5, F6»;
where «F1» is the best (fitness
«Excellent») and «F6» the worst
(fitness «Very Poor»).
STEADY WATT RATE
PROGRAM
Press the UP▲/DOWN▼ keys to
select the WATT function and press
ENTER. By
UP▲/DOWN▼ keys you can program
the watts to produce for the exercise
(between 50-280 Watt.). Select the
watts and press ENTER to program
the time. Press ENTER again to
program the distance. Press the ENTER
key one last time to program the
calories. Press START/STOP to start
the exercise.
The exertion level for the exercise is
self adjusting based on the speed and
number of watts selected.
USER PROGRAM.-
Use the UP▲/DOWN▼ keys to select
the PERSONAL function and press
ENTER. The first column of the
exercise level will start flashing to the
left of the central area of the display.
by pressing
function and
pressing
Select the desired level for this first
the stage using the UP▲/DOWN▼ keys
and then press ENTER. Repeat this
procedure to program all sixteen
stages of the user program. Press
START/STOP to start the exercise.
To program time, distance and/or
press
calories, go through the following
procedure: Once the user program
has been defined and before pressing
the START/STOP key, press and hold
the ENTER key for 4 seconds until the
time function starts to flash. Press the
UP▲/DOWN▼ keys to select the
time.
program the distance. Press ENTER
again to program the calories. Press
START/STOP to start the exercise.
HEART RATE CONTROL
PROGRAMS.-
Use the UP▲/DOWN▼ keys to select
the H.R.C function and press ENTER.
Use the UP▲/DOWN▼ keys to select
the desired option (55%, 75% 90% or
the
Tag) and press the ENTER key. The
first three represent the percentage with
respect to maximum heart rate (220-
age) and the fourth is used to specify
the target heart rate manually. If you
choose Tag then you should use the
UP▲/DOWN▼ keys to select the
desired heart rate and then press
ENTER. Press START/STOP to start
the exercise. The exertion level will
adjust automatically in accordance with
the selected hart rate value. If the pulse
rate is below the target value then the
exertion setting will increase by one
level every 30 seconds until it reaches
the maximum 24. If the pulse rate is
above the target value the monitor will
give out warning beeps and reduce the
exertion settings by one level every 15
seconds until it reaches the minimum 1.
11
Press the ENTER key to