Uline H-1069C Manual De Instrucciones página 2

NOTE: The sealer will take approximately 10 to
15 minutes to warm up.
1. Turn the unit on by plugging it in and adjusting the
temperature dial. See Recommended Settings table
(page 3) to determine optimal temperature.
(See Figure 4)
Figure 4
2. Once the unit is warmed up, insert bag into the
mouth of the sealer and apply pressure to the foot
pedal to seal the bag. (See Figures 5 and 6)
Figure 5
3. Take pressure off
the foot pedal to
release the sealing
jaw and remove the
bag. (See Figure 7)
Figure 7
PAGE 2 OF 9
OPERATION
Figure 6
4. If not using the foot pedal, insert bag into the sealer
and squeeze the handle of the unit together. Hold to
seal the bag. (See Figure 8)
Figure 8
5. Release the handle and remove the sealed bag.
(See Figure 9)
Figure 9
6. Allow the sealer to cool down for 15 minutes
before storing.
0821 IH-1069C