Publicidad
Idiomas disponibles
Idiomas disponibles
To set the time:
1. Press and hold TIME SET for 3 seconds,
then release it. The hour will flash.
-
+
2. Use (
/
) to set the hour.
3. Press TIME SET again. Use the (
set the minute (hold
4. Press TIME SET once more to confirm and exit
the Time Set Mode.
CHANGING THE TIME FORMAT
Press 12/24HR to toggle between 12 and 24 hour
mode (the default is 12-hour time format). When
using the 12-hour time format, the AM/PM light will
appear to indicate AM or PM.
ALARM SET UP
1. Press and hold ALARM SET for 3 seconds, then
release it. The hour will flash. Use (
the hour (hold down
2. Press ALARM SET again. Use (
ute. Press ALARM SET once again to confirm
and exit from Alarm Set Mode.
To toggle the alarm on or off, press ALARM ON/
OFF. The alarm icon will appear when the alarm is
on. The default alarm volume is maximum (90db).
Use the VOLUME knob on the back of the clock to
adjust the volume. It has a range of 30-90db.
-
+
or
for rapid selection).
-
+
or
for rapid selection).
-
–5–
-
+
/
) buttons to
-
+
/
) to set
+
/
) to set the min-
Publicidad
