Sauder worksense Bergen Circle Serie Instrucciones De Montaje página 5

Step 1
å
Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å
Carefully stand the unit upright.
å
Remove the DRAWERS (H and J) by separating the
EXTENSION SLIDES from the EXTENSION RAILS as
shown in the upper diagram below. Be prepared,
the parts are greasy.
å
Remove the hardware box from the inside of the DRAWER
CABINET (A).
www.sauder.com/officeservice
A
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
Push the black lever up and pull the SLIDE from the RAIL.
RAIL
O X
E B
A R
R D W
H A
426278
7
Some assembly
(and snacks) required.
SLIDE
H
J
Page 5