Sauder Clifford Place Serie Instrucciones De Montaje página 21

Step 17
å
Carefully stand your unit upright.
å
Loop the straps from the ANTI TIP KIT (17) through the
HOOKS in the BACKS (E and G) as shown below.
å
Then insert a drawer into the lower EXTENSION RAILS
of your unit by lining up the EXTENSION SLIDES on the
drawer with the EXTENSION RAILS on the unit. Push the
drawer into the unit until the drawer is fully inserted. The
drawer will push in hard until it is all the way in, then it will
slide in and out easier.
å
Fasten the straps to the DRAWER BACK (K) using a barrel
nut, WASHER (14), and machine screw as shown in the
large diagram to the right.
First, loop the straps
through the HOOKS.
421114
K
E
G
K
www.sauder.com/service
strap
machine
screw
washer
barrel nut
First, loop the straps
through the HOOKS.
14
Page 21