Descargar
Compartir
Imprimir esta página
Sauder Cannery Bridge Serie Instrucciones De Montaje
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Muebles de Interior
  5. Cannery Bridge Serie
  6. Instrucciones de montaje
Sauder Cannery Bridge Serie Instrucciones De Montaje

Sauder Cannery Bridge Serie Instrucciones De Montaje

Ocultar thumbs Ver también para Cannery Bridge Serie:

Publicidad

Enlaces rápidos

Descargar este manual
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Computer Desk
Cannery Bridge Collection | Model 429510
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-47
Français pg 48-53
Español pg 54-59
Lot # 569747
Purchased: __________________
08/02/21

Publicidad

loading

Manuales relacionados para Sauder Cannery Bridge Serie

Resumen de contenidos para Sauder Cannery Bridge Serie

  • Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
  • Página 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 7-47 Français 48-53 Español 54-59 Safety 60-62 Warranty Page 2 www.sauder.com/service 429510...
  • Página 3 RIGHT SMALL DRAWER SIDE (2) SHELF (1) TOP (1) SMALL DRAWER BACK (2) W DOOR (1) RIGHT BOTTOM (1) SMALL DRAWER BOTTOM (2) LEFT BOTTOM (1) MODESTY PANEL (1) LARGE DRAWER FRONT (1) BACK (2) LEFT LARGE DRAWER SIDE (1) 429510 www.sauder.com/service Page 3...
  • Página 4 DOOR STOP - 1 DOWEL - 24 APPLIQUE CARD - 1 HINGE - 2 BUMPER CARD - 1 METAL PIN - 4 GROMMET FILE FILE GLIDE - 2 GROMMET - 2 WITH CAP- 1 HANGER - 2 Page 4 www.sauder.com/service 429510...
  • Página 5 Screws are shown actual size. You may receive extra hardware with your unit. 1/2" FLAT HEAD SCREW - 4 3/8" FLAT HEAD SCREW - 38 1/2" PAN HEAD SCREW - 18 1-1/2" FLAT HEAD SCREW - 8 7/8" MACHINE SCREW - 4 429510 www.sauder.com/service Page 5...
  • Página 6 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. Page 6 www.sauder.com/service 429510...
  • Página 7 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
  • Página 8 NOTE: Be sure the WOOD DOWELS in the SKIRT insert into the LEFT BOTTOM. These surfaces should be even. Surface with HIDDEN CAMS S u r f a c i t h H I D D E N Page 8 www.sauder.com/service 429510...
  • Página 9 Step 3 å Push four LARGE HIDDEN CAMS (5) into one of the BACKS (H). Arrow Arrow 429510 www.sauder.com/service Page 9...
  • Página 10 DOWELS (8) in the BACK (H). S u r f a c i t h H I D D E N D E N H I D i t h f a c S u r Page 10 www.sauder.com/service 429510...
  • Página 11 Step 5 å Push three LARGE HIDDEN CAMS (5) into the LEFT END (A). å Turn six CAM SCREWS (7) into the LEFT END (A). Arrow 429510 www.sauder.com/service Page 11...
  • Página 12 NOTE: Be sure the WOOD DOWELS in the LEFT END insert into the BACK and LEFT BOTTOM. S u r f a c i t h H I D D E N I D D u t H i t h o f a c S u r Page 12 www.sauder.com/service 429510...
  • Página 13 Push three LARGE HIDDEN CAMS (5) into the LEFT UPRIGHT (C). å Turn six CAM SCREWS (7) into the LEFT UPRIGHT (C). å Turn the LEFT UPRIGHT (C) over. å Turn three CAM SCREWS (7) into the LEFT UPRIGHT (C). Arrow 429510 www.sauder.com/service Page 13...
  • Página 14 Fasten the LEFT UPRIGHT (C) to the BACK (H), SKIRT (K) and LEFT BOTTOM (X). Tighten six HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the LEFT UPRIGHT insert into the BACK, and LEFT BOTTOM. Page 14 www.sauder.com/service 429510...
  • Página 15 BACK (H), and SKIRT (K). Use eight 1/2" PAN HEAD SCREWS (23). å NOTE: You should start each SCREW a few turns before completely tightening any of them. (4 used) 1/2" PAN HEAD SCREW (8 used in this step) 429510 www.sauder.com/service Page 15...
  • Página 16 Step Step 10 å Push ten LARGE HIDDEN CAMS (5) into the RIGHT BOTTOM (F), and remaining SKIRT (K). å Turn two CAM SCREWS (7) into the SKIRT (K). Arrow Arrow Arrow Arrow Arrow Page 16 www.sauder.com/service 429510...
  • Página 17 NOTE: Be sure the LARGE WOOD DOWELS in the SKIRT insert into the RIGHT BOTTOM. These surfaces should be even. Surface with S u r HIDDEN CAMS f a c i t h H I D D E N 429510 www.sauder.com/service Page 17...
  • Página 18 Step Step 12 å Push four LARGE HIDDEN CAMS (5) into the remaining BACK (H). Arrow Arrow Page 18 www.sauder.com/service 429510...
  • Página 19 DOWELS (8) in the BACK (H). S u r f a c i t h H I D D E N D E N H I D i t h f a c S u r 429510 www.sauder.com/service Page 19...
  • Página 20 Push three LARGE HIDDEN CAMS (5) into the RIGHT UPRIGHT (D). å Turn six CAM SCREWS (7) into the RIGHT UPRIGHT (D). å Flip the RIGHT UPRIGHT (D) over. å Turn three CAM SCREWS (7) into the RIGHT UPRIGHT (D). Arrow Page 20 www.sauder.com/service 429510...
  • Página 21 å NOTE: The SMALL EXTENSION SLIDES will be used later for the SMALL DRAWERS. Push the black lever and pull the SLIDE from the RAIL. 3/8" FLAT HEAD SCREW (6 used in this step) Open end 429510 www.sauder.com/service Page 21...
  • Página 22 å NOTE: The LARGE EXTENSION SLIDES will be used later for the LARGE DRAWERS. Push the black lever and pull the SLIDE from the RAIL. 3/8" FLAT HEAD SCREW (4 used in this step) Open end Page 22 www.sauder.com/service 429510...
  • Página 23 RIGHT BOTTOM, and BACK. S u r f a c H I D D E N i t h D E N H I D i t h f a c S u r 429510 www.sauder.com/service Page 23...
  • Página 24 Step Step 18 å Push three LARGE HIDDEN CAMS (5) into the RIGHT END (B). å Turn six CAM SCREWS (7) into the RIGHT END (B). Arrow Page 24 www.sauder.com/service 429510...
  • Página 25 SMALL EXTENSION RAIL in to find the other holes that lines up with the holes in the RIGHT END. Turn a SCREW into these holes. 3/8" FLAT HEAD SCREW (6 used in this step) Open end 429510 www.sauder.com/service Page 25...
  • Página 26 LARGE EXTENSION RAIL in to find the other holes that lines up with the holes in the RIGHT END. Turn a SCREW into these holes. 3/8" FLAT HEAD SCREW (4 used in this step) Open end Page 26 www.sauder.com/service 429510...
  • Página 27 Fasten the RIGHT END (B) to the RIGHT BOTTOM (F), BACK (H) and SKIRT (K). Tighten six HIDDEN CAMS. å NOTE: Be sure the LARGE WOOD DOWELS in the RIGHT END insert into the RIGHT BOTTOM, and BACK. 429510 www.sauder.com/service Page 27...
  • Página 28 BACK (H), and SKIRT (K). Use eight 1/2" PAN HEAD SCREWS (23). å NOTE: You should start each SCREW a few turns before completely tightening any of them. (4 used) 1/2" PAN HEAD SCREW (8 used in this step) Page 28 www.sauder.com/service 429510...
  • Página 29 Step 23 å Push seven LARGE HIDDEN CAMS (5) into the MODESTY PANEL (G). Arrow Arrow Arrow 429510 www.sauder.com/service Page 29...
  • Página 30 NOTE: Be sure the LARGE WOOD DOWELS in the UPRIGHTS insert into the MODESTY PANEL. (6 used) S u r f a c i t h H I D D E N Surface with HIDDEN CAMS Page 30 www.sauder.com/service 429510...
  • Página 31 Fasten the DOOR STOP (12) to the TOP (E) as shown. Use two 1/2" PAN HEAD SCREWS (23). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" PAN HEAD SCREW (2 used in this step) (13 used) 429510 www.sauder.com/service Page 31...
  • Página 32 Fasten the TOP (E) to the ENDS (A and B), UPRIGHTS (C and D), MODESTY PANEL (G), and BACKS (H). Tighten thirteen HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the ENDS, UPRIGHTS, MODESTY PANEL and BACKS. (14 used) Page 32 www.sauder.com/service 429510...
  • Página 33 Insert the GROMMET WITH CAP (17) into the large hole in the TOP (E). å Insert the GROMMETS (20) into each of the large holes in the LEFT UPRIGHT (C) and LEFT BOTTOM (X). (4 used) (2 used) 429510 www.sauder.com/service Page 33...
  • Página 34 Step Step 28 å Fasten a PULL (11) to the DOOR (W) as shown in the enlarged diagram. Use a 7/8" MACHINE SCREW (25). 7/8" MACHINE SCREW (1 used in this step) Page 34 www.sauder.com/service 429510...
  • Página 35 Fasten the HINGES (13) to the DOOR (W). Use four 1/2" FLAT HEAD SCREWS (22). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" FLAT HEAD SCREW (4 used in this step) 429510 www.sauder.com/service Page 35...
  • Página 36 SCREW a few turns before completely Mounting tightening any of them. screw å Peel the BUMPER from the BUMPER CARD (15) and stick Adjusting them onto the DOOR (W) as shown. screw å See the next step for DOOR adjustments. Hinge Page 36 www.sauder.com/service 429510...
  • Página 37 To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed. Tighten the mounting screw after making adjustments. Mounting screw (depth) Adjusting screw (horizontal) (vertical adjustment) 429510 www.sauder.com/service Page 37...
  • Página 38 Step Step 32 å Push four SMALL HIDDEN CAMS (6) into the LARGE DRAWER SIDES (R and S). å Turn four CAM SCREWS (7) into the LARGE DRAWER FRONT (Q). Arrow Page 38 www.sauder.com/service 429510...
  • Página 39 SIDES (R and S). Use six 3/8" FLAT HEAD SCREWS (21) through the holes shown in the enlarged diagram. Open end 3/8" FLAT HEAD SCREW (6 used in this step) Edge with holes Open end Open end 429510 www.sauder.com/service Page 39...
  • Página 40 Step Step 34 å Fasten a PULL (11) to the LARGE DRAWER FRONT (Q) as shown in the enlarged diagram. Use a 7/8" MACHINE SCREW (25). 7/8" MACHINE SCREW (1 used in this step) Page 40 www.sauder.com/service 429510...
  • Página 41 NOTE: Be sure the WOOD DOWELS in the LARGE DRAWER FRONT insert into the LARGE DRAWER SIDES. å NOTE: Be sure the LARGE DRAWER BOTTOM (U) inserts into the groove of the LARGE DRAWER FRONT (Q). 429510 www.sauder.com/service Page 41...
  • Página 42 DRAWER SIDES (R and S). Hang your letter files on the FILE GLIDES (18). å Option 2: Place the FILE HANGERS (19) onto the FILE GLIDES (18). Hang your legal or letter files on the FILE HANGERS (19). Option 1 Option 2 Page 42 www.sauder.com/service 429510...
  • Página 43 Step 37 å Push four SMALL HIDDEN CAMS (6) into the SMALL DRAWER SIDES (M and N). å Turn four CAM SCREWS (7) into the SMALL DRAWER FRONTS (L). Arrow 429510 www.sauder.com/service Page 43...
  • Página 44 SCREWS (21) through the holes shown in the enlarged diagram. Open end 3/8" FLAT HEAD SCREW (12 used in this step) Edge with holes Edge with holes Open end Open end Edge with holes Edge with holes Open end Open end Page 44 www.sauder.com/service 429510...
  • Página 45 Step 39 å Fasten the PULL (11) to the SMALL DRAWER FRONTS (L) as shown in the enlarged diagram. Use two 7/8" MACHINE SCREWS (25). 7/8" MACHINE SCREW (2 used in this step) 429510 www.sauder.com/service Page 45...
  • Página 46 NOTE: Be sure the WOOD DOWELS in the SMALL DRAWER FRONT insert into the SMALL DRAWER SIDES. å NOTE: Be sure the SMALL DRAWER BOTTOM (P) inserts into the groove of the SMALL DRAWER FRONT (L). å Repeat this step for the other small drawer. Page 46 www.sauder.com/service 429510...
  • Página 47 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 15 lbs. 429510 www.sauder.com/service...
  • Página 48 DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en EXTRÉMITÉ GAUCHE ..........1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet EXTRÉMITÉ DROITE ..........1 PETITE GLISSIÈRE D'EXTENSION ....4 élément, faire référence MONTANT GAUCHE ..........1 PETITE COULISSE D'EXTENSION....4...
  • Página 49 Fixer le MONTANT GAUCHE (C) à l'ARRIÈRE (H), à la PLINTHE (K) et au DESSOUS GAUCHE (X). Serrer six EXCENTRIQUES ESCAMOTABLES. REMARQUE : S’ a ssurer de bien insérer les GRANDES CHEVILLES EN BOIS du MONTANT GAUCHE dans l'ARRIÈRE et le DESSOUS GAUCHE. 429510 www.sauder.com/service Page 49...
  • Página 50 MONTANT DROIT dans le DESSOUS DROIT et l'ARRIÈRE. Faire tourner six VIS D'EXCENTRIQUE (7) dans le MONTANT DROIT (D). Retourner le MONTANT DROIT (D). Faire tourner trois VIS D'EXCENTRIQUE (7) dans le MONTANT DROIT (D). Page 50 www.sauder.com/service 429510...
  • Página 51 Fixer l'EXTRÉMITÉ DROITE (B) au DESSOUS DROIT (F), à l’ARRIÈRE (H) et à la PLINTHE (K). Serrer six EXCENTRIQUES ESCAMOTABLES. REMARQUE : S’ a ssurer de bien insérer les GRANDES CHEVILLES EN BOIS de l'EXTRÉMITÉ DROITE dans le DESSOUS DROIT et l’ARRIÈRE. 429510 www.sauder.com/service Page 51...
  • Página 52 GRAND TIROIR (Q). ÉTAPE 33 Fixer les GRANDES COULISSES D'EXTENSION (4) aux CÔTÉS DE GRAND TIROIR (R et S). Utiliser six VIS TÊTE PLATE 9,5 mm (21) à travers les trous comme l'indique le schéma agrandi. Page 52 www.sauder.com/service 429510...
  • Página 53 Serrer quatre CHEVILLES D’EXCENTRIQUE (7) dans les DEVANTS DE PETIT TIROIR (L). REMARQUE : Prière de lire les informations importantes sur la sécurité figurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. 429510 www.sauder.com/service Page 53...
  • Página 54 (JUEGO DE EXTENSIÓN SE MUESTRA POR su referencia futura. Si SEPARADO) EXTREMO DERECHO ..........1 necesita ponerse en RIEL DE EXTENSIÓN PEQUEÑO ....4 contacto con Sauder en PARAL IZQUIERDO .............1 CORREDERA DE EXTENSIÓN PEQUEÑA ..4 cuanto a esta unidad, PARAL DERECHO ............1 refiérase al número RIEL DE EXTENSIÓN GRANDE ......2...
  • Página 55 Fije el PARAL IZQUIERDO (C) al DORSO (H), al FALDÓN (K) y al uno de los DORSOS (H). FONDO IZQUIERDO (X). Apriete seis EXCÉNTRICOS ESCONDIDOS. NOTA: Asegúrese de que los PASADORES DE MADERA GRANDES en el PARAL IZQUIERDO se introduzca en el DORSO y el FONDO IZQUIERDO. 429510 www.sauder.com/service Page 55...
  • Página 56 NOTA: Asegúrese de que los PASADORES DE MADERA en el PARAL Vuelva el PARAL DERECHO (D) al revés. DERECHO se introduzca en el FONDO DERECHO y en el DORSO. Atornille tres BIELAS DE EXCÉNTRICO (7) en el PARAL DERECHO (D). Page 56 www.sauder.com/service 429510...
  • Página 57 Fije el EXTREMO DERECHO (B) al FONDO DERECHO (F), al DORSO (H) y al FALDÓN (K). Apriete seis EXCÉNTRICOS ESCONDIDOS. NOTA: Asegúrese de que los PASADORES DE MADERA GRANDES en el EXTREMO DERECHO se introduzca en el FONDO DERECHO y el DORSO. 429510 www.sauder.com/service Page 57...
  • Página 58 DE CABEZA PERDIDA de 9,5 mm (21) a través los agujeros Luego, apriete el tornillo de montaje. correspondientes indicados en el diagrama ampliado. Page 58 www.sauder.com/service 429510...
  • Página 59 Fije las CORREDERAS DE EXTENSIÓN PEQUEÑAS (2) a los LADOS DE CAJÓN PEQUEÑO (M y N). Utilice doce TORNILLOS DE CABEZA PERDIDA de 9,5 mm (21) a través los agujeros correspondientes indicados en el diagrama ampliado. 429510 www.sauder.com/service Page 59...
  • Página 60 • This product is not designed to support a not designed to support a television is heavy. Plus the weight and location of the television. hazardous. picture tube tends to make TVs unbalanced and prone to tipping forward. Page 60 www.sauder.com/service 429510...
  • Página 61 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 429510 www.sauder.com/service Page 61...
  • Página 62 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 62 www.sauder.com/service 429510...
  • Página 63 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Página 64 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.

Este manual también es adecuado para:

Cannery bridge 429510