Publicidad
Idiomas disponibles
Idiomas disponibles
Clean in a dishwasher
1. Wash. Place disassembled Collection Kits parts in dishwasher. Be
sure to place small items into a closed-top basket so they don't end
up in the dishwasher filter. If possible, run the dishwasher using hot
water and a heated drying cycle (or sanitizing setting); this can
help kill more germs.
2. Remove from dishwasher. Wash your hands with soap and
water before removing and storing cleaned items. If items are not
completely dry, place items on a clean, unused dish towel or paper
towel to air-dry thoroughly before storing or use the provided
Drying Mess Bag to air dry all parts. Do not use a dish towel to rub
or pat items dry because doing so may transfer germs to the items.
6. Clean wash basin and bottle brush. If you use a wash basin or bottle
brush when cleaning your Collection Kits parts, consider washing them
every few days, either in a dishwasher with hot water and a heated drying
cycle, if they are dishwasher-safe, or by hand with soap and warm water.
Rinse them well and allow them to air-dry after each use.
7. Tubing
• Wipe the outside of the Tubing with a clean, damp cloth. Avoid getting
water or other fluids inside the Tubing.
• If liquid is found inside the Tubing, rinse the Tubing with clean, hot water.
Hang to AIR DRY COMPLETELY BEFORE USING. Do NOT insert any object
into Tubing.
Store Safely Until Needed
To help prevent germs and mold from growing, allow the clean Collection Kit
parts, bottle brushes, and wash basins to air-dry thoroughly before storing.
Once completely dry, and to prevent contamination during storage, the items
should be stored in a clean, protected area.
• Wash hands. Wash hands well with soap and water.
• Reassemble. Put together the clean, dry Collection Kit parts.
• Store safely. Place reassembled Collection Kit in a clean, protected area
such as inside an unused, sealable food storage bag. Store wash basins and
bottle brushes in a clean area.
4. Start-up Procedure and Operation
11
Publicidad
