4.3 Operating EZExpress
LED Display
Mode Indicator
Depending on the state of the device, the multifunction
display will show the following information:
• Session time in seconds (first minute of pumping), then in minutes.
• L1 to L9 for the vacuum level (along with the vacuum level display).
1
On/Off Button
2
4. Start-up Procedure and Operation
Press the On/Off Button
pumping.
Note: The pump is now in Standby Mode.
Press the Play/Pause Button
pumping. At the first 1~59 seconds, the
LED Indicator shows the time by second;
after the 59 seconds, The LED Indicator
shows the time by minute.
Multifunction Display
to begin
to begin
17