Byron DIC-22805 Manual Del Usuario página 8

Instruction manual
4.2 SCREEN ICONS
1. Wi-Fi signal strength
2. SD card inserted
3. a) Outdoor unit powered by battery
b) Outdoor unit powered by power adapter
4. a) Video recording
b) Picture captured
5. a) Indoor unit powered by battery
b) Indoor unit powered by power adapter
6. Time and date
• Charge the battery immediately when the icon indicates a low
battery level.
4.3 SETTINGS MENU
In the standby mode, first press the intercom/monitor button and then
the ok/menu button to open the main menu. Use the directional keys
to navigate through the different settings. Press the ok/menu button to
select the highlighted submenu.
1. Camera pairing
2. Image setting
3. Volume control
4. Music setting
5. Play back
6. Rec/snap
7. Time setting
8. Unlock time setting
9. Exit
8
4.4 ANSWERING A CALL
When the doorbell rings, you can:
A. Press the camera button to make a video or take a picture.
B. Press the lock button to open the door (optional).
C. Press the gate button to open the gate (optional).
D. Press the talk button to talk to your visitor.
4.5 PAIRING
This indoor unit can be paired as a replacement for your existing
indoor unit, or as an additional monitor.
Pairing as a replacement for existing indoor unit
A. Press the power button on the indoor unit until the LED turns on.
B. Press the menu button.
C. Select the pairing icon.
D. Press the ok/menu button to confirm.
E. Press left/right button to select the doorbell/monitor icon.
F. Press the ok/menu button to confirm.
G. On the screen you will see that the indoor unit is now in pairing
mode. Press the doorbell button for a couple of seconds and the
outdoor and indoor unit will now be paired.
Pairing as an additional indoor unit (monitor)
A. Power on the indoor unit that already has been successfully
paired with the outdoor unit and enter the pairing interface.
B. Use the left or right button to select the (1) icon.
C. Press the menu/ok button to confirm.
D. Power on the additional monitor and enter the pairing interface.
E. Use the left or right button to select the (2) icon.
F. Press the menu/ok button to confirm.