ABC Design Pramy Luxe Instrucciones De Uso página 10

8. Adjusting the backrest
To adjust the seat unit, pull the retainer on the rear of the backrest upwards and then adjust the height of
the seat. When you have reached the required position, let go of the retainer to allow the seat to remain
in that position.
9. Adjusting the height of the pushbar
To adjust the pushbar, press the buttons in on both sides.
Then let go of the buttons again to allow the pushbar to click into place.
10. Adjusting the leg rest
To adjust the leg rest, press in the buttons on both sides and then adjust the height.
Let go of the buttons again so that the leg rest clicks into place.
11. Removing the sun canopy
Undo the zip fastener on the side of the canopy.
12. Adjusting the reversible pushbar
a.
Pull the levers at the bottom of both sides of the pushbar upwards, as shown on the photograph, and
raise the pushbar.
b.
The pushbar can now be pivoted to the other side of the pushchair. Make sure that the pushbar locks
into place properly.
13. Folding the pushchair
NB: The pushbar must be positioned on the hood side of the pushchair!
a.
Pull the top two levers on the pushbar upwards, as shown on the photograph. Press the pushbar
forwards slightly until the point of resistance.
b.
Now use your foot to release the second catch which is on the bottom right-hand side of the pushchair.
c.
Fold the pushbar all the way down.
Note: To unfold the pushchair, follow the instructions in point 1 "Opening the pushchair".
Caution: Ensure that all the catches are engaged before use.
14. Velcro fasteners on reversible pushbar
Take additional precautions to secure the reversible pushbar in place by fastening the Velcro strips
provided on both sides of the handlebar and frame bar.
EN - 07
All manuals and user guides at all-guides.com