iRobot Roomba Combo j9+ Manual Del Usuario página 16

Care and Maintenance Instructions for Your Clean
Base® Auto-Fill Dock
To keep your Clean Base® Auto-Fill Dock running at peak performance, perform
the procedures on the following pages.
EN
Part
Bags
Refill Tank
Charging Contacts
Sensors, IR Window, Visual
Docking Target
Note: iRobot manufactures various replacement parts and assemblies. If you think you
need a replacement part, please contact iRobot Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
12 For more information, visit global.irobot.com
Care Frequency Replacement
Frequency*
- Bags should be replaced
when prompted by the LED
indicator / app
Rinse and refresh water -
as needed
Clean every 2 weeks -
Clean once a month -
Replacing the Bag
1
Use pull tab to open door and
remove Debris Bag Drawer.
3
Install a new bag, sliding the
plastic card into the guide rails.
2
Pull up on the plastic card
to remove the bag from the
canister. Discard the used bag.
Note: This will seal the bag so
dust and debris cannot escape.
4
Reinstall the Debris Bag Drawer
and close the door making
sure it is completely closed.