Hilti PSA 80 Manual De Instrucciones Original página 19

All manuals and user guides at all-guides.com
3.4 Charging status display on the PUA 80 charger
PUA 80
Status
1 LED lights red.
LED 1 blinks red
1 LED lights green.
LED 1 blinks green
3.5 Battery charge status indicator PSA 81
PSA 81
The PSA 81 battery is equipped with 5 LEDs that indicate the state of charge. To display the current state
of charge, press the button on the top of the battery. Up to 4 green LEDs then light for a few seconds; the
more LEDs that light, the better is the battery's state of charge.
Status
4 LEDs light green.
3 LEDs light green.
2 LEDs light green.
1 LED lights green.
1 LED lights red.
Note
The fault may be remedied by charging the battery. If charging does not remedy the fault, the battery
must be replaced.
The error message can have the following causes:
• Voltage too high
• Short circuit
• Voltage too low
• Temperature is outside the charging temperature range
• Wrong charger is connected
• Electronic fault
While charging, the LEDs show the following statuses:
Status
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
1 LED blinks.
Note
The PSA 81 (01 and 02) battery may be charged only with the PUA 81 AC adapter.
The PSA 81 (05) battery can be charged either with the PUA 81 AC adapter or the PUA 85 19V charger.
Printed: 28.10.2016 | Doc-Nr: PUB / 5070487 / 000 / 02
Meaning
• The battery is charging.
• The battery is fully charged.
• The charger or the battery is not in working
order.
• The battery is not charging.
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• Charge status: < 25 %
• Error
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• Charge status: < 25 %
English 13