Chauvet UL56 Guía De Referencia Rápida página 6

SlimPAR 56 QRG
DMX Linking
Starting Address
Master/Slave
Connection
DMX Values
7-CH
Channel Function
3-CH
Channel Function
The SlimPAR 56 can work with a DMX controller when linked by DMX
serial connections. Instructions configuring this product for DMX operation
are in the User Manual. If you are not familiar with DMX, download the
DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 506 (in the 7-channel DMX personality).
To select the starting address, do the following:
1. Press <MENU> repeatedly until 3-CH or 7-CH shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address (d001–d506).
4. Press <ENTER>.
The SlimPAR 56 uses the DMX data connection for its Master/Slave mode.
Instructions for connecting and configuring this product for Master/Slave
operation are in the User Manual.
1 Red
2 Green
3 Blue
Color Macros
4
(Overrides Ch 1–3)
Speed
(When Ch. 6
is 032–223)
5
Strobe
6 Mode
7 Dimmer
1 Red
2 Green
3 Blue
Value Percent/Setting
000 ó 255 0–100%
010 ó 255 0–100%
030 ó 255 0–100%
000 ó 015
No function
016 ó 255
Color macros
000 ó 255 Slow to fast
001 ó 015
No function
016 ó 255
Slow to fast
000 ó 031 RGB mode
032 ó 063 Pulse effect 0–100%
064 ó 095 Pulse effect 100%–0
096 ó 127 Pulse effect 100%–0–100%
128 ó 159 Auto fade transition
160 ó 191 Auto snap transition (3 colors)
192 ó 223 Auto snap transition (7 colors)
224 ó 255 Sound-Active mode
000 ó 255 0–100%
Value Percent/Setting
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
6
EN