Stanley STP18 Manual De Instrucciones página 36

English (original instruction)
Max. planning width 318 mm.
318mm
Keep hands away from cutterhead!
This product requires a two person lift-use
proper lifting techniques.
Turning direction of cutter block.
THE PACKAGE CONTAINS
1 Heavy-duty planer
1 Open ended key (8/10 mm)
1 Dust extraction adapter
1 Gauge
1 2.5mm hex wrench
1 5mm hex wrench
1 Instruction manual
♦ Check for damage to the tool, parts or accessories which
may have occurred during transport.
♦ Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (FIG. A)
WARNING: Never modify the power tool or any
part of it. Damage or personal injury could result.
1 Cutter head adjustment handle
2 Carrying handle
3 Depth scale pointer
4 Depth scale
5 Handholds
6 Mounting holes
7 In-feed extension table
8 Material removal depth scale
9 ON/OFF switch
10 Circuit overload switch
12 Adjustable scale
13 2.5mm hex wrench
14 5mm hex wrench
15 Open ended key
16 Gauge
17 Cord wrap
18 Dust extraction adaptor
19 Base
36
20 Depth stop
21 Tool tray
42 Top bar
43 Anti-Kickback
WARNING:
Your thickness planer has been
designed for professional wood planing applications.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
♦ Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
♦ This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for
their safety. Children should never be left alone with
this product.
ELECTRICAL SAFETY
Only one voltage is applicable to this tool. Be sure to check
that the power supply corresponds to the voltage on the
rating plate.
When the power cord is damaged, or if the replacement of
the supply cord is necessary, have it sent to a STANLEY
service center for replacement to specially prepared cables.
USING AN EXTENSION CABLE
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
BEFORE USE
♦ Before using the tool for the first time, it is recommended
to receive practical information.
♦ Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool.
♦ Use suitable detectors to find hidden utility lines or call the
local utility company for assistance(contact with electric
lines can lead to fire or electrical shock; damaging a
gas line can result in an explosion; penetrating a water
pipe will cause property damage or an electrical shock).
♦ Do not work materials containing asbestos (asbestos is
considered carcinogenic).
♦ Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful (contact
with or inhalation of the dust may cause allergic reactions
2
;