EN
Laser safety notices – Laser class 2 (ODS9L2...)
ATTENTION, LASER RADIATION – LASER CLASS 2
Never look directly into the beam!
The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007)
safety regulations for a product of laser class 2 as well as the
U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice
No. 50" from June 24, 2007.
Never look directly into the laser beam or in the direction of reflected laser
beams!
If you look into the beam path over a longer time period, there is a risk of injury
to the retina.
Do not point the laser beam of the device at persons!
Interrupt the laser beam using a non-transparent, non-reflective object if the
laser beam is accidentally directed towards a person.
When mounting and aligning the device, avoid reflections of the laser beam
off reflective surfaces!
Caution – Use of controls or adjustments or performance of procedures other
than specified herein may result in hazardous light exposure.
Observe the applicable statutory and local laser protection regulations.
The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
18