Leuze electronic ODS9 Manual Del Usuario página 21

Part number code
ODS9 L2.8 /L A 6 -100 -M12
Decommissioning, maintenance
CAUTION
 Do not open the device yourself under any circumstances! There is otherwise
a risk of uncontrolled emission of laser radiation from the device. The housing
of the ODS9 contains no parts that need to be adjusted or maintained by the
user. If faults cannot be cleared, the device should be switched off and pro-
tected against accidental use.
 Package the device for transport and storage in such a way that is protected
against shock and humidity. Optimum protection is achieved when using the
original packaging. Ensure compliance with the approved environmental con-
ditions listed in the specifications.
 Do not use aggressive cleaning agents such as thinner or acetone for clean-
ing the device.
Technical data
NOTE
Technical data
 Additional specifications and notices for using the device can be found in the
operating instructions.
Connection -M12 M12 connector, 5-pin, A-coded
-100
-200
Measurement
range
-450
-650
6
Pin 5 K
X
A
Pin 2
6
Pin 4 L
.8
L1
Laser class
L2
9
ODS
Measurement range 50 ... 100mm
Measurement range 50 ... 200mm
Measurement range 50 ... 450mm
Measurement range 50 ... 650mm
Push-pull switching output
Multifunction input
(default: teach input)
Not assigned (n. c.)
Analog output
Push-pull switching output
IO-Link / OUT1
With display and control buttons
Laser class 1 acc. to IEC 60825-1:2007
Laser class 2 acc. to IEC 60825-1:2007
9 series
Optical distance sensor
EN
21