Bosch 0.603.206.100 Manual Original página 20

OBJ_BUCH-620-003.book Page 19 Thursday, January 31, 2008 2:05 PM
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended for atomising sol-
vent-based and water-dilutable paints, finishes,
primers, clear finishes, automotive finishes,
staining sealers, wood sealer-preservatives,
plant protectives, oil and disinfection agents.
The power tool is not suitable for spraying dis-
persions and latex paint, caustic solutions, acid-
ic coating materials, coating materials with
granules or solids as well as spray and drip-im-
peding materials.
Use the machine only when you can fully assess
all functions and handle them without limita-
tion, or after having received appropriate in-
structions.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
The hand-arm acceleration is typically below
2
2.5 m/s .
Bosch Power Tools
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Mark for SDS connection
5 Thumbwheel for spraying capacity
6 Hose port (spray gun)
7 Handle extension
(only for 800 ml container)
8 Container for spray material, 600 ml
Container for spray material, 800 ml*
9 Trigger switch
10 Suction tube with container seal
11 Nozzle
12 Nozzle seal
13 Air hose
14 SDS connector
15 Base unit
16 Holding clamp
17 Eyelet for carrying strap
18 On/Off switch
19 Hose connection (base unit)
20 Carrying strap
21 Measuring cup
22 Air filter cover
*The accessories illustrated or described are not in-
cluded as standard delivery.
1 609 929 R18 | (31.1.08)
English | 19