Aqua Medic Qube 50 plant Manual De Instrucciones página 10

Idiomas disponibles

Now, the stainless steel wire is fed through the nut of the ceiling suspension

by pressing the

stopper down with a fingernail.

The nut is screwed into the ceiling suspension

and the wire comes

out of the lateral opening.

When the wire has the requested length, any surplus wire may be cut off

with pliers.

The black nut has to be screwed into the thread of the Qube (Fig. 1, No. 6) for fixing

the light. The steel wire can only be adjusted in length at the

ceiling

suspension. Attention: If the

stopper is pressed, the wire may slip out and the Qube falls into the aquarium. Therefore, hold the

light tight.

Pay attention to a sufficient distance to the water surface so no water or salt enters the

light!

Fig. 2: Steel wire suspension

1. Plug

2. Ceiling suspension

3. Screw

4. Nut for ceiling suspension

5. Steel wire

6. Nut for Qube

fixing

Available spare parts: Please refer to www.aqua-medic.de.

5.2. Mounting the aquarium fixing

Fig. 3: Holder incl. goose neck

Qube 50