Publicidad
Idiomas disponibles
Idiomas disponibles
INITIAL SETTING in °F or °C:
• Simply plug-in the Thermostat to go with the initial setting
(for NA): Dimming Mode – 86°F Daytime and 77°F Night-time
temperature – time setting 12:00AM (sunrise 9:00AM – Sunset
9:00PM)
• If you want to switch to °C, please press and hold the MOON
button on the back while plugging-in the device. The Thermostat
will be set to 30°C daytime and 25°C night-time. The display will
show the actual temperature and the clock setting 00:00.
SET CLOCK and TIMER:
1. Press and hold the "T" button at the back of the thermostat
during 4 seconds to start setting the clock and timer. The time
that is currently set will appear and start blinking.
2. Press the "T" button once again and the clock hours will start
blinking; turn the knob at the back to adjust the hours;
3. Press the "T" button once again and the clock minutes will start
blinking, turn the knob at the back to adjust the minutes;
4. Press the "T" button once again and the clock time setting is
finalised. Now the "SUN" symbol appears and the "daytime"
hours will start blinking; turn the knob at the back to adjust the
"daytime" hours;
5. Press the "T" button once again and the "daytime" minutes will
start blinking, turn the knob at the back to adjust the "daytime"
minutes;
6. Press the "T" button once again and the "daytime" setting is
finalised. The "MOON" symbol appears and the "night-time"
hours will start blinking; turn the knob at the back to adjust the
"night-time" hours;
8
7. Press the "T" button once again and the "night-time" minutes
will start blinking, turn the knob at the back to adjust the "night-
time" minutes;
8. Press the "T" button once again and the "night-time" setting
is finalised.
SET TEMPERATURE and HEATING MODE:
Daytime:
1. To set the "daytime" temperature and heating mode, press
and hold the "SUN" button at the back of the thermostat for 4
seconds. The temperature that is currently set will start blinking;
turn the knob at the back to adjust the temperature;
2. Press the "SUN" button once again and the heating mode will
start blinking; turn the knob at the back to select the desired
heating mode (ON/OFF, Pulse or Dimming);
3. Press the "SUN" button once again and the desired "daytime"
temperature and heating mode setting is finalised.
Night-time:
1. To set the "night-time" temperature and heating mode, press
and hold the "MOON" button at the back of the thermostat for 4
seconds. The temperature that is currently set will start blinking;
turn the knob at the back to adjust the temperature;
2. Press the "MOON" button once again and the heating mode will
start blinking; turn the knob at the back to select the desired
heating mode (ON/OFF, Pulse or Dimming);
3. Press the "MOON" button once again and the desired "night-
time" temperature and heating mode setting is finalised.
• To check the "daytime" temperature and heating mode, simply
press the "SUN" button
• To check the "night-time" temperature and heating mode, simply
press the "MOON" button
• After setting the temperature, you can always switch between
°C and °F by unplugging the device, then press and hold the "T"
button while plugging-in the device. This will switch between °C
and °F, without changing your settings.
1. Red LED lights up and heating symbol is visible: heating device
is powered
2. Blue LED lights up and heating symbol disappears: heating
device is no longer powered, set temperature has been reached
"Please note that the Red LED indicates power to the attached
heating device and not mains power to the Exo Terra
GUARANTEE
This unit is guaranteed for defects in material or workmanship for
a period of 1 year from date of purchase. This guarantee is valid
with proof of purchase only. The guarantee is limited to repair or
replacement only and does not cover consequential loss, loss or
damage to livestock and personal property or damage to animate or
inanimate objects, irrespective of the cause thereof. This guarantee
is valid only under normal operating conditions for which the unit
is intended. It excludes any damage caused by unreasonable use,
negligence, improper installation, tampering, abuse or commercial
use. The warranty does not cover wear and tear, breakage of glass or
parts which have not been adequately or correctly maintained. THIS
DOES NOT AFFECT YOUR STATUTORY RIGHTS.
SERVICE
If you have any problems or questions about the operation of
this product, please let us try to help you before you return the
product to your dealer. Most problems can be handled promptly
with a phone call. When you call (e-mail or write), please have all
relevant information such as model number and/or part numbers
available, as well as the nature of the problem. Please ensure that all
maintenance instructions have been adhered to before returning the
product to your retailer.
Distribution and Customer Service:
Canada:
Rolf C. Hagen Inc.
20500 Trans-Canada Hwy
Baie-D'Urfé QC, H9X 0A2
Toll Free Number 1-800-55HAGEN (1-800-554-2436)
Between 9:00 am and 4:30 pm (Eastern Standard Time)
http://faq.hagencrm.com/?en
U.S.A. :
Rolf C. Hagen (U.S.A.) Corp.
305 Forbes Blvd, Mansfield, MA 02048
Toll Free Number 1-800-724-2436
Between 9:00 am and 5:00 pm (Eastern Standard Time)
mail to: customer.service-usa@rchagen.com
For general information on our whole product range, explore our
websites at: www.exo-terra.com or www.hagen.com.
thermostat."
®
Publicidad
