Publicidad
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads
from the scale. put the first load on the scale, get the weight
reading. Press the button to reset the LCD reading to "0" before
adding the new load. You can repeat this operation.
Condition 1: "ZERO" function: To be used only within the
maximum range of the scales (5 Kg)
The LCD display will show "----" or 0 g each time it is pressed.
"----" is an error message and means that the scales are not
stable, wait a moment until 0 g appears, meanwhile an O icon
at the top left of the LCD display indicates that the ZERO
function is active. The maximum weight capacity remains
unchanged.
Condition 1: "TARE" function
The LCD display will show "----" or 0 g each time it is pressed.
"----" is an error message and means that the scales are not
stable, wait a moment until 0 g appears, meanwhile a T icon in
the upper left corner of the LCD indicates that the TARE
function is active.
With the above conditions:By pressing , you can display the
total weight of all loads on the scale. If you want to weigh more
loads, simply press to restore the LCD reading to '0' again.
INSTRUCTION MANUAL
Publicidad
