Descargar Imprimir esta página

Ferm PWM1001 Traducción Del Manual Original página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
5. MAINTENANCE
Before cleaning and maintenance,
always switch off the machine and
remove the battery pack from the
machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
Suction filter (9)
The suction filter (9) must be inspected regularly,
so as to avoid blockage and restriction of the
water supply to the pressure washer.
Cleaning nozzle (3)
When the nozzle (3) is clogged, it may cause
failure. The nozzle can be cleaned by inserting
a small pin into the tip to remove filth.
Storage and frost protection
The pressure washer and accessories that are
not completely drained can be destroyed by
frost. Completely drain the pressure washer and
accessories and protect them against frost.
Keep the pressure washer in well-ventilated dry
premises with temperature not going below +5ºC.
When not in use, keep this appliance stored in
a safe place out of reach of children.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
WARRANTY
The warranty conditions can be found on the
separately enclosed warranty card.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.
9

Publicidad

loading