iRobot Roomba j9 Manual Del Usuario página 8

Cleaning the Full Bin Sensors
1
Remove and empty the bin.
EN
2
Wipe the inner sensors with a clean, dry
cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Open Door
5 For more information, visit global.irobot.com
Washing the Bin
Important: Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter, and
open the bin door.
2
Rinse the bin using warm water.
Note: Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Cleaning the Edge-Sweeping
Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.